Mojo PWR 2

PRODUCT INFO

The Mojo PWR 2 is a truly versatile wing, ideal for those looking for a one-wing solution for both powered and free flight. The all new design features many optimisations and updates: reduced sail drag, reinforced and optimised line layout, reduced line consumption, newly-shaped wing tips for less roll and optimised cell openings for impeccable launching behaviour and improved full speed performance. Internally, the wing has been updated with a new structure and alignment of the rib holes for better structural stability and cohesion. The risers feature trimmers for fast cruising, adjustable pulleys to adjust the brake line lengths depending on your motor setup along with magnetic brake connectors.

Special attention has been made to the ground handling and inflation characteristics of the wing to make the whole launching process easier, less stressful and ultimately safer. Setting up is easy; the risers are simple and clean the wing inflates smoothly – without overshooting or hanging back – even in zero wind conditions. In stronger winds it inflates progressively with less tendency to “shoot up” and pull the pilot off their feet.

In the air the Mojo PWR 2 is agile, stable and comfortable with a sporty feel. The increased top speed and reduced tendency to oscillate improves the PPG experience when flown heavily loaded under power, and the tight sporty feel through the brakes when in free flight mode makes it ideal for thermalling, ridge soaring and XC flying. In active air the wing is compact and forgiving, it cuts through turbulence efficiently and is very resistant to deflations. It delivers gentle, predictable feedback and filters air movements in an understandable way. At full speed the leading edge remains solid allowing for a large usable speed range and high cruise speeds.

Brake pressure and brake precision have been further refined for improved handling – turns are easy to initiate, and the wing maintains bank angles whilst thermalling with minimal input and a sporty dynamic feel.

The balance of performance, safety and strength is an important consideration for any new pilot, and the Mojo PWR 2 combines EN A* rating with solidity, agility, low sink rate, and excellent glide performance that is necessary for short take off and low fuel consumption during long XC flights.

The Mojo PWR 2 is a versatile crossover wing which excels in both free flying and powered flight. It is suitable for students in all levels of training and also for the newly qualified who require an easy, safe and solid wing for their first 100s hours of paramotor experience as well as paragliding ridge soaring, thermalling and XC flying.

 *This wing has passed the criteria required by the DGAC and has been load tested to the EN 926.1 standard. In addition to our own extensive testing, it has also been independently flight tested to the EN 926.2 standard with the trimmers set to the slow position. Releasing the trimmers, or flying outside of the EN certified weight range invalidates any EN flight certification. As delivered, the wing does not conform to the EN 926.2 standard due to the inclusion of the trimmer risers.

ORDERING INFORMATION
OZONE has some of the shortest lead times in the industry. The current production time is approximately 69 days from order to shipping (updated daily). Contact your dealer to place your order.

MATERIALS
Top Surface Cloth: Dominico 30D
Bottom Surface Cloth: Porcher 9018 E65
Rib cloth: Porcher 9017 E29 (hard)
Upper lines: Liros DSL serie
Mid lines: Liros DSL serie
Lower Lines: Edelrid 10-200_6843

DOWNLOADS
Manual: EN
DGAC Mojo PWR 2 30
DGAC Mojo PWR 2 28
DGAC Mojo PWR 2 26
DGAC Mojo PWR 2 24
DGAC Mojo PWR 2 22
Load test Certificate Mojo PWR 2
Mojo PWR 2 Rigging diagram
MojoPWR 2 – lines

NOTE

You can have fun and be distinctive by choosing your own personal colour combination for your wing. Wings have two to four colour zones and you have many colours to choose from. Have you wing all one colour, multicoloured, or your trademark colour so other pilots recognise you in the air.  Customization incurs a fee ranging from $100 to $200. To customise your colour you will need to go to the Ozone website where they have a custom colour selector. Go to www.flyozone.com, find your wing, scroll down the page to the custom colour selector specific to your design and fabric and click away. When your custom colour design is done, please email it to hello@paraglidingshop.com.au

Buy it now online! Here at Paraglidingshop.com.au 

COLOUR OPTIONS